OHAUS Frontier FC5306 Manuel D'instructions page 6

EN-2
Measures for operational safety
 Do not lean on the centrifuge.
 Do not stay within the clearance envelope longer than necessary for
operational reasons.
 Do not deposit any potentially hazardous materials within the clearance
envelope.
 Do not unscrew the two halves of the housing.
 Dry off any liquid spills immediately! The instrument is not watertight.
 Verify that the AC adapter's input voltage range and plug type are
compatible with the local AC power to be used.
 Do not position the equipment such that it is difficult to disconnect the AC
adapter from the power receptacle.
 Make sure that the power cord does not pose a potential obstacle or
tripping hazard.
 The equipment is for indoor use only. Use the equipment only in dry
locations.
 Use only approved accessories and peripherals.
 Operate the equipment only under ambient conditions specified in these
instructions.
 Disconnect the equipment from the power supply when cleaning.
 Do not operate the equipment in hazardous or unstable environments.
 Service should only be performed by authorized personnel.
Exclude the following environmental influences:
 Powerful vibrations
 Direct sunlight
 Atmospheric humidity greater than 80%
 Corrosive gases present
 Temperatures below 5 ° C and above 40 ° C
 Powerful electric or magnetic fields
TM
Frontier FC5306