HAIRCUT TH51 Guide De L'utilisateur page 21

4.4 Lubricating the cutters
Figure 4: Removing the blades by
pressing on it with the thumb.
Figure 5: Applying lubricating oil.
4.5 Switching off
Switch the clippers off by pushing the On/Off switch (Figure 1, B)
downwards.
Fit the cutter cover (Figure 1, K).
After 30 minutes of use, switch the
clippers off by pushing the On/Off
switch (Figure 1, B) downwards.
Detach the blades by pressing on the
spot shown by the arrow (Figure 4)
with your thumb.
Apply 1 or 2 drops of lubricating oil on
the 5 points shown opposite.
Reinsert the blades, taking care to fit
the lug in its slot first.
21