GGP ITALY 92 Manuel D'utilisation page 90

speed of the machine increases.
– Reverse is engaged by pressing the pedal with the heel
towards «R».
– The pedal automatically goes into neutral «N» when
released.
WARNING!
Only shift into reverse when the
machine has stopped moving.
NOTE
If the drive pedal is used, whether
forwards or for reverse, the engine stops as soon as the
parking brake (4.4) is engaged.
4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT
LEVER
This lever has two posi-
tions as shown on the
label:
«A» = Transmission
engaged: for all
uses, when mov-
ing and during
cutting;
«B» = Transmission
disengaged: this
makes it much
easier to move
the machine by
hand, with the
engine turned
off.
4.31
4.32
N
F
R
B
4.33
A
IMPORTANT
To avoid damage to the transmission
unit, this operation must be carried out only when the
engine has stopped with the pedal (4.32) on position «N».
EN 15