Controls And Instruments; Key Ignition Switch; Steering Wheel; Parking Brake - GGP ITALY 92 Manuel D'utilisation

4. CONTROLS AND INSTRUMENTS

4.2a 4.6
4.5
4.1
4.2
4.8

4.1 STEERING WHEEL

Turns the front wheels.
4.2 THROTTLE
This regulates the engine's r.p.m. The positions are indicated on
a plate showing the following symbols:
«CHOKE» cold starting
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position enriches the mixture so must only be
used for the time necessary when starting from cold.
EN 12
4.7 4.3
B
A
A
B
4.4
4.9
– When moving from one area to another, put the lever in a
position between «SLOW» and «FAST».
– When cutting, shift into «FAST».
4.2a CHOKE CONTROL (if fitted)
It enriches the mixture and must only be used for the necessary
time for cold starting.

4.3 KEY IGNITION SWITCH

This key operated control has three positions:
«OFF» everything is switched off;
«ON» activates all parts;
«START» connects the starter motor.
If you release the key on «START», it will automatically return to
«ON».

4.4 PARKING BRAKE

This brake stops the machine from moving when it has been
parked. There are two positions:
«A» = Brake off
«B» = Brake on