GGP ITALY 92 Manuel D'utilisation page 101

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The frequency of mowing should be in relation to the rate of
5.
growth of the grass. The grass should not be left to grow
too much between one cut and the next.
6.
During hot and dry periods, the grass should be cut a little
higher to prevent the ground from drying out.
The best height of the grass on a well-kept lawn is approx.
7.
4-5 cm. With one cut, you do not need to remove more
than a third of the total height.
If the grass is very tall, it should be cut twice in a twenty-
four hour period - the first time with the blades at maximum
height, possibly reducing the cutting width, and the second
cut at the desired height.
8.
The appearance of the lawn will improve if you alternate
cutting in both directions.
9.
If the collector system tends to get blocked with grass, you
should reduce the forward speed as it may be too high for
the condition of the grass. If the problem persists, the prob-
able causes are either badly sharpened blades or deformed
wings.
EN
26
10.
2
1
Be very careful when mowing near bushes or kerbs as
these could distort the horizontal position of the cutting
deck and damage its edge as well as the blades.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

102

Table des Matières