Changing And Inserting The Charcoal Filter; Replacing Bulbs - Faber Inca In-Light Inlt21Ssv Instructions D'installation, D'utilisation Et D'entretien

CHANGING AND INSERTING THE CHARCOAL
FILTER
1) Angle the top of the filter up
and into the area below the
motor and then insert the
lower portion of the filter.
2) Turn the filter to the right
around the motor and slide
the filter between the motor
and side wall.
3)Position the filter on the side
of the blower and turn to
lock in place.
4)Repeat on the left side.

REPLACING BULBS

LED lights must be replaced by Faber factory authorized
service.
27