Replacing The Activated Charcoal Filter - Faber INCA IN-LIGHT INLT21SSV Instructions D'installation, D'utilisation Et D'entretien

REPLACING THE ACTIVATED CHARCOAL FILTER

The Activated Charcoal Filters (FILTER1) are not washable and cannot be
regenerated, and must be replaced approximately every 4 months of operation,
or more frequently with heavy usage.
1. Open the Panel by pulling it down.
2. Remove the Filter, pushing it towards the back of the unit and at the
same time pulling downward.
3. Remove the saturated Activated Charcoal Filters, as indicated (A).
4. Fit the new Filters, as indicated (B).
5. Replace, taking care to ensure that the handle faces forwards.
6. Close the Panel.
CAUTION: When used in recirculation mode, to Reduce the Risk of
Fire and Shock use only conversion kit Model FILTER 1 or FILTER1LL.
NOTE: For FILTER1LL,
Long lasting filters,
they can be washed
and reused.
See instructions
included with those
filters.
26
A
B
W