Connecting House Power - Faber INCA IN-LIGHT INLT21SSV Instructions D'installation, D'utilisation Et D'entretien

CONNECTING HOUSE POWER

ELECTRICAL INSTALLATION WITH CONNECTION CABLE
8
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event
of an electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance is equipped
with a cord having a grounding wire with a grounding plug. The plug must be
plugged into an outlet that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a
qualified electrician install an outlet near the appliance.
The power cord shall be accessible for inspection after installation.
ELECTRICAL INSTALLATION WITH OPTIONAL WIRING BOX
For permanent wiring, use only the Direct Connect Wiring Box accessory sku
WIREBOX, manufactured by Faber.
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
Max. 33 "
7/16
-
Created by
Denomination
-
EN
Lang
Modif.by
Approved by
Approval date
Doc. status
Drawing N.
NEW_DRAWING_BOX
1 /1
Sheet
Rev
01
19