AEG MRC 4147 L Mode D'emploi page 32

English
32
Displaying diverse information
1. Switch the device to standby using the
2. Briefly press the button (15) repeatedly. The following
information is displayed in succession:
Year  Date
If the button is no longer pressed, the display will switch back
to time after about 5 seconds.
Toggling the display
The following can be shown alternatingly on the display:
Time  Temperature
1. In order to activate this function, use the
switch the device to standby.
2. Keep the button (15) pressed, until " " appears
briefly on the display.
Switch off toggling: Press and hold the
when in standby and with the clock time displayed. "
appears briefly on the display.
Toggle temperature display between °C (Celsius) and °F
(Fahrenheit)
1. Switch the device to standby using the
2. Press the button (18) to display the temperature.
3. While the temperature is displayed, press the
for about 3 seconds to switch between °C and °F.
USB Charging Socket (9)
You can charge your Smartphone through this jack. Use the
USB cable of your Smartphone for the connection.
NOTE:
• Due to the different Smartphone types that are offered
today, and their different charging capacities, the load-
ing duration is dependent on the Smartphone used
and its operating condition.
• A playback of audio-files through this connector is not
possible.
Setting the Clock
1. Use the button (23) to switch the device to standby.
2. Hold the button (18) depressed until the year indica-
tion on the display flashes.
• Now you can set the year, the month, the day, the
time display format (12Hr/24Hr), the hours, and the
minutes with the buttons
• In each case, confirm the input with the
The current indication to be set flashes on the display.
NOTE:
• The input is stored automatically within approximately
30 seconds when no button is pressed.
• The following will appear with the 12 hour display:
PM = Afternoon
Switching to Summer Time
button (23). 1. Use the
2. Keep the button
Radio station tuning
1. Use the
2. If reception is too weak, change the position of the dipole
button (23) to
Preset stations
You can preset up to 10 radio stations.
button again
1. Search for a station as described under "Radio station
"
2. Keep the
3. Use the
button (23).
4. Press the
button
Tune into the preset station
Press the
scan through the preset station memory.
Alarm function
Setting of the Alarm (in standby)
You can set two alarm times. 4 different alarm options are
available: Radio + Light / Radio / Buzzer + Light / Buzzer.
Proceed as follows:
1. Press the
2. Keep the
3. Use the buttons
4. Press the
5. Use the buttons
6. Now select the days you want the alarm to sound. The
(17) and (15).
button.
6a. When you have selected the setting 1-1:
button (23) to switch the device to standby.
(17) depressed to switch between
summer time and normal time. The later time is summer
time.
(17) and (15) buttons to tune the desired
station. If you keep one of the buttons pressed, the de-
vice searches for the next radio station. The display shows
the tuned frequency.
antenna in order to improve the reception.
tuning".
button (18) pressed. The preset location
indicator flashes on the display (e.g. P02).
(17) and (15) buttons to select the desired
preset station memory.
button to preset the station.
/ button (18/16) repeatedly in radio mode to
button (13). The currently set alarm time is
shown.
button pressed for approx. 3 seconds when
the alarm time is displayed. The hours of the currently set
alarm time start to flash.
(17) and
button for confirmation. The minutes start to
flash.
and for setting.
following selections can be made:
• 1-5 = Monday to Friday
• 1-7 = Monday to Sunday
• 6-7 = Saturday and Sunday
• 1-1 = Weekday
1. Press the button to select the weekday.
2. Make your selection with the buttons
(1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 =
Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday)
(15) for setting.
and .