QSC PLD Série Mode D'emploi page 24

Save the Preset
After modifying the Inputs and Outputs for all channels, save the current settings as one of the 50 user-defined presets (U1: thru U50:). Each of the
user presets, by default, is the same as factory preset F1: Config A B C D, so when you save the preset you are "overwriting" the preset currently in
that numbered position. If you started by recalling a factory preset, you must use the SAVE AS feature. If you started with a user-defined preset, you
can overwrite the preset you started with using the SAVE feature, or use the SAVE AS feature to overwrite a different user preset.
HOME > PRESETS > PRESET > SAVE> SAVE AS > ENTER
Step 1 — Save a New Preset - Select and Edit Preset Number
U1: A B C D
C
Edit preset number or press EXIT
Step 2 — Name the Preset
U1: A B C D
EN
C
Press ENTER to edit preset name
Step 3 — Save the Preset
U1: A B C D
C
Press ENTER to save preset
HOME > PRESETS > PRESET SAVE > SAVE > ENTER
Use this procedure when you are saving the preset by overwriting the currently active user preset. After you use the SAVE AS feature to save the preset
you are working on, it then becomes the currently active preset, and you can use the SAVE feature to save periodically as you work on the preset.
Step 1 — Overwrite Preset
U1: A B C D
Press ENTER to save preset
TD-000368-00-A
User Preset Number: 21
New Preset Name
o n f i g -
SAVE
User Preset Number: 21
New Preset Name
o n f i g X
SAVE
User Preset Number: 21
New Preset Name
o n f i g X
SAVE SAVE
SAVE
A
Indicates editing
Indicates "New
Preset Name"
A
is selected
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
A
24
To edit User Preset number, press
Turn to select desired number (1 thru 50)
To confirm User Preset Number, press
Scroll to New Preset Name
Scroll to desired letter position
Turn to select desired character
When you are finished naming, press
Scroll to SAVE
To confirm Save, press
To exit without saving, press
To confirm the save, press
ENTER
ENTER
press
ENTER
press
ENTER
press
ENTER
EXIT
Press
ENTER
ENTER
To save, press
ENTER
EXIT
ENTER