QSC PLD Série Mode D'emploi page 23

Array Correction
NOTE!: You must have a QSC line array loaded in order to access the Array Correction parameters.
HOME > OUTPUTS > SPKR PROC > ARRAY > ENTER
Step 1 — Set Splay Angle and Number of Boxes in the Array
F1: A B C D
AC
Save a Loudspeaker
HOME > OUTPUTS > SPKR PROC > SAVE SPKR > ENTER
When you Save a speaker profile, you are saving all of the output settings currently active for the channel. The new profile you save does not need to
be Loaded, it is already active.
Step 1 — Save a Loudspeaker with Custom Load Profile
ABOUT
Output Data: AB + CD
Band:
Nominal Imped:
Power Rating:
Enter Speaker Info
Step 2 — Name the Loudspeaker Profile
ABOUT
Speaker Profile Name
M y
Press ENTER to edit name
Output
A
Splay Angle: Total cumlative
angle of the array.
Array Length: Total number of
boxes in the array.
Angle Boxes #
15.0 4
SPEAKERS SAVE
2-Way LF
16.0
1000
SPEAKERS SAVE
S p k r
SAVE
Angle:
0.0˚ to 90.0˚
Boxes #:
0 to 20
Nominal Impedance and
Power Rating are the nominal
settings for a single loudspeaker
of this type.
After confirming settings, Scroll to SAVE
Indicates editing
Scroll to desired letter position
Indicates "Speaker
Profile Name"
is selected
Turn to select desired character
Up to 21 characters
A - Z / a - z / 0 - 9 /
When finished, scroll to SAVE
_ / - / space
23
Scroll to select (Angle or Boxes#)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to select (Band,
Nominal Imped, Power Rating)
To edit, press
Turn to adjust parameter
To confirm, press
T
o add Speaker Profile Name, press
TD-000368-00-A
ENTER
ENTER
EXIT
EN
ENTER
ENTER
ENTER
press
ENTER
press
ENTER
press
ENTER