QSC PLD Série Mode D'emploi page 17

Step 2 — Select Output Channel for Speaker Assignment
OUTPUTS
Output:
A
8.0
Imped:
Power: 625
Spkr: - - - -
Assign
Step 3 — Select Speaker Type for Channel
OUTPUTS
Output:
Speaker:
WL2102 BiLFNS
2-Way LF
Band:
80 Hz
Filter:
ASSIGN
Step 4 — Select User Preset Number
OUTPUTS
User Preset Number:
New Preset Name
C o n
Edit preset number or press EXIT
Step 5 — Assign New User Preset Name
OUTPUTS
New Preset Name
M y
Edit preset number or press EXIT
SPEAKERS SAVE
B C D
8.0 8.0 8.0
625 625 625
- - - - - - - - - - - -
Assign Assign Assign
SPEAKERS SAVE
A
SPEAKERS SAVE
21
f i g - A
SAVE
SPEAKERS SAVE
User Preset Number: 21
P r e s
SAVE
When you are finished setting
the Impedance and Power for
each output, continue to scroll
to access the SPEAKERS tab.
Loudspeaker assignment is optional,
you can assign a loudspeaker to one
or more channels, or none at all.
Band and Filter
selections are based on
the Speaker you select.
You must select a
loudspeaker before
selecting Band and Filter.
To assign the speaker to the output channel, press
When you have finished
selecting loudspeakers,
continue to scroll to
access the SAVE tab.
Scroll to New Preset Name
Indicates editing
Scroll to desired letter position
Indicates "New
Preset Name"
selection
Turn to select desired character
Up to 21 characters
A - Z / a - z / 0 - 9 /
When finished, scroll to SAVE
_ / - / space
17
Scroll to select Output channel
To Assign a loudspeaker, press
Continue to Step 3.
To edit Speaker, press
Scroll to select a Speaker model
To confirm, press
Scroll to select (Band, Filter)
To edit, press
Turn to adjust parameter
To confirm, press
Scroll to select ASSIGN
Scroll to the Save screen
To edit User Preset number, press
Turn to adjust parameter
To confirm, press
TD-000368-00-A
ENTER
ENTER
ENTER
EN
ENTER
ENTER
ENTER
ENTER
ENTER
press
ENTER
press
ENTER
press
ENTER
press
ENTER