Use Of "Rototek" Or "Multireg 99; Maintenance; Oil Check And Change - Interpump Group TSX Série Mode D'emploi

Pressure selection must be carried out with closed pistol (1)
A - selection of the pressure
• High pressure (2)
• Low pressure (3)
A
1
8 - PRECAUTIONS AGAINST FREEZING AND INSTRUCTIONS FOR STORAGE
If the machine is stored where temperatures fall below the freezing level, it is advisable to suck
antifreeze (similar to that used for automobiles) into the pump before storage. In any case keep
the machine in a warm room for a couple of minutes before use.
Before any maintenance operations turn the machine off.

9.1 - OIL CHECK AND CHANGE

• Periodically check the oil level.
• Oil must be changed after the first 50 hours of operation of the machine. Subsequent oil
changes must be carried out every 300 hours of machine operation.
• In any case it is advisable to change the oil at least once a year.
• Oil type: SAE 15W40 MINERAL
• Oil capacity. 0,4 liters
7 - USE OF ROTOTEK OR MULTIREG 99
L
L

9 - MAINTENANCE

B - selection of the jet
• straight pin jet (4)
• fan jet (5)
2
H
3
H
22
B
L H
L H
4
5