Interpump Group TSX Série Mode D'emploi page 20

a
Do not start the unit if the high pressure hose, connectors and the gun are damaged. By
replacement make sure that the new components have at least the same rating as the original
components.The technical specifications of the hose should be printed on the hose itself (max
pressure, production date, manufacturer).
a Avoid covering the machine during use and
use the machine in a well ventilated area.
a Do not leave the machine running for more
than 5 minutes with the pistol closed. After
this time period the water temperature within
the machine increase and may cause damage
to the machine.
a When the machine is off insert the safety
device on the pistol to avoid accidental ope-
ning.
a For safety reasons use only original accessories and spare parts.
THE MANUFACTURER CANNOT BE HELD RESPONSABLE FOR ANY DAM-
AGE CAUSED BY DISRESPECTING THE DESIGNATED USES OF THIS
MACHINE, IT'S INSTRUCTIONS AND WARNINGS INDICATED IN THIS
BOOKLET.
NO
5 min.
20
NO