Chemical Suction; Use Of "Rototek" Or "Multireg 99 - Interpump Group TX 300 10-130.2 Mode D'emploi

The TX 300 and TX 500 series high pressure cleaners have been constructed to permit the suc-
tion and mixing of detergents and other liquids from the internal tank.
7.1 -

CHEMICAL SUCTION

Fill as shown in fig.1. Select low pressure mode on Multireg or Rototek nozzle (Fig. 2). Adjust
the desired quantity of detergent by turning the knob (Fig. 3).
To drain the tank, unscrew the cap on the bottom of the machine (Fig. 4).
After use, rinse the chemical suction circuit with plain water.
Capacity of built-in tank: TX300 18 liters – TX500 25 liters.
In the event of direct contact with detergent additives, follow instructions provided by the man-
ufacturer and/or product retailer and rinse the affected body part with clean water.
Pressure selection must be carried out with closed gun (1)
A - selection of the pressure
• High pressure (2)
• Low pressure (3)
A
1
7 - HOW TO USE CHEMICAL PRODUCTS
fig.2
fig.1
8 - USE OF ROTOTEK OR MULTIREG 99
L H
L H
fig.4
B - selection of the jet
• straight pin jet (4)
• fan jet (5)
2
B
3
16
I
0
4
L H
5
L H
fig.3