Interpump Group TX 300 10-130.2 Mode D'emploi page 17

Avoid covering the machine during use and
use the machine in a well ventilated area.
When the machine is off insert the safety
device on the gun to avoid accidental opening.
The unit is equipped with a thermal protec-
tor which trips and electrically disconnects the
motor when it overheats.
If this event occurs, turn the selection knob on
the unit to the "0" position (machine OFF).
Read carefully the troubleshooting guide befo-
re starting the unit again.
To ensure the security of the machine, use only original spare parts and accessories supplied
by the manufacturer.
THE MANUFACTURER CANNOT BE HELD RESPONSABLE FOR ANY DAM-
AGE CAUSED BY DISRESPECTING THE DESIGNATED USES OF THIS
MACHINE, IT'S INSTRUCTIONS AND WARNINGS INDICATED IN THIS
BOOKLET.
NO
15