Inlet Filter; Replacement Of High Pressure Nozzle - Interpump Group TX 300 10-130.2 Mode D'emploi

10.2 - INLET FILTER

Before using the machine it is IMPORTANT to make sure that the filter is clean. Wash the filter
under a water tap or blow it with air to remove completely all dirt particles.
Remember that a well-cleaned filter means good performance and long life for your machine.

10.3 - REPLACEMENT OF HIGH PRESSURE NOZZLE

Periodically it is necessary to replace the high pressure nozzle as this is a component subject
to normal wear during use. This wear can generally be noticed by a decrease of the working
pressure. Contact your dealer if you wish to purchase a new nozzle.
Remove filter from
water inlet.
Blow the filter with
air.
18
Wash the filter under
a water tap.