Assembly, Anchor Positioning; Loop Positioning - BFT Espas30 I Manuel D'utilisation Et D'installation

9 - ASSEMBLY, ANCHOR POSITIONING

Prepare the entrance/exit in order to make it easy for cars to approach the station. Avoid tight
bends immediately before or after the station. Keep the access lane as flat as possible but,
above all, avoid laying lanes on an uphill slant.
70

10 - LOOP POSITIONING

We recommend loops are installed as shown in the following drawings:
30 - Espas30 I
200
espas20 I
Espas30 I
31
130
150
400
200
150
300
175
280
20 30
50