Fulgor Milano FCH 905 ID TS G DWK Instructions Pour L'installation Et L'utilisation page 46

Unlocking for cooking
The front right hob zone display (FR) and the special Power Booster (P) must be
simultaneously pressed to unlock and prepare the Touch Control unit.
The symbol [L] indicating LOCKED disappears from the display. The displays of all the hob
zones display [0], together with a flashing dot. Possible hot hob zone [H] warning lights
GB
are permanently displayed. After the command unit is turned off, the child safety lock will
reactivate again.
This procedure must be completed within 10 seconds and no other key must be pressed
except for that mentioned, otherwise the procedure is cancelled. Other keys cannot be
activated. The power button only can be used (Power) to turn off the Touch Control (and
restart the procedure).
Permanent unlock
The hob zone display of the front right hob zone (FR) and the special Power Booster (P)
must be simultaneously pressed, then press the special Power Booster again.
This procedure must be completed within 10 seconds and no other key must be pressed
except for that mentioned. The Touch Control remains in the Off mode (all displays are
blank), failing which the procedure is cancelled and the Touch Control switches to Off mode
after 20 seconds.
If the control unit is activated by pressing the ON/OFF key, all displays will show the "0"
symbol, the dots on the display continue to flash and the command unit can be used for
cooking. In the presence of the hot hob zone warning lights [H], this message is displayed
alternately with [0] and at the same time with the dot on the display.
Acoustic signalling (buzzer)
The following activities carried out during the operation of the Touch Control are signalled
by a buzzer:
– Single brief acoustic signal for the regular activation of a key. The acoustic signal is only
emitted on the first activation for the Slider area. No acoustic signal is emitted during the
modification of the values.
– A longer intermittent acoustic signal for the permanent use of the keys for a more prolonged
period (> 10 seconds
– Timer time-out
Timer function (CL)
There are two different types of timer function available:
– Independent Timer 1.99 minutes: acoustic signal with timing. This function can be activated
only if there are no other hob zones functioning (all levels = 0). If any of the hob zones
are activated (level >0) the independent timer remains active. If the timer must be used
to switch off a cooking area (see timer for cooking area), then the command must first be
turned off and on.
– Hob zone timer 1.99 minutes: This function can be activated as long as a hob is on (level
< 0; dot on the display). Four cooking areas to be deactivated are freely programmable
timer and beep.
46