Open Window Detection, Energy Savings - RADSON Hydronic PTC BLOWER 950W Notice D'utilisation

Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
seconds. Press twice, the programme for each day of the week
(Comfort, Eco, P1, P2 or P3) will scroll on display in front of you.
- To exit the programme viewing mode, press
Manual and temporary exemption from a running
programme
This function allows you to change the setting temperature tempora-
rily until the next scheduled change in temperature or the transition
to 0:00.
Example:
1- The device is in Auto mode, the running programme is Eco 15,0°C.
2- By pressing or , you can change temporarily the desired
temperature up to 16°C for example.
Note: The cursor corresponding to the operating mode, i.e Eco mode in
our example, is blinking during the duration of the temporary deroga-
tion.
3- This change will be automatically cancelled at the next change of
programme or transition to 0:00.
3
Manual and temporary modification of Boost duration
in Auto mode
When a Boost is automatically launched in Auto mode, you can modify
temporarily the duration of the current Boost cycle. This duration won't
be saved for next automatic or manual Boost cycle.
Example:
1- The device is in Auto mode, the running programme is Comfort
19,0°C and an automatic Boost cycle is running.
2- By pressing
for 5 Boost duration up to 70 minutes for example.
twice.
3- This change will be automatically cancelled at the end of the Boost
cycle.
OPEN WINDOW DETECTION, ENERGY
SAVINGS
Important information about the open window detec-
tion
Important: the open window detection is sensitive to temperature va-
riations. The device will react to the window openings in accordance
with different parameters: temperature setting, rise and fall of tempe-
rature in the room, outside temperature, location of the device...
If the device is located close to a front door, the detection may be dis-
turbed by the air caused by opening door. If this is a problem, we re-
commend that you disable the automatic mode open window detection
(see page
10).
Overview
Lowering temperature cycle by setting frost protection during venti-
lation of a room by opened window. You can access the open window
detection from the Comfort, Eco and Auto modes. Two ways to enable
the detector:
- Automatic activation, the lowering temperature cycle starts as soon
as the blower detects a temperature change.
- Manual activation, the cycle of lowering temperature starts by pres-
sing a button.
or , you can change temporarily the desired
3
14). You can, however, use the manual activation
2
EN
(see page
1
Legend
= the favoured
location
= another location
M16MI325 A03_06/18
9