Tecnical Specifications - RADSON Hydronic PTC BLOWER 950W Notice D'utilisation

EN
Technical Specifications
- IP24 (blower must always be oriented horizontal following installation).-
- Voltage when in use: 230V +/-10% 50Hz.
- Switch: approved cycle 10,000.
- Radio frequency: 2,4035 Ghz/ 2,4055 Ghz / 2,4075 Ghz.
- Maximum RF power transmitted: <1mW.
- Standby consumption: <1W.
Integrated tangencial blower:
- Built-in anti-overheating safety device (Overheating protec- tion by in-
ternal sensor and thermal fuse).
- PTC heating resistance with self-adaptive power of 950W +5/- 10% ac-
cording to environment.
Power supply cable:
- Class II: 800 mm, 2 conductors or 3 conductors.
Environment:
Compliance statement:
We hereby declare under our sole responsibility that the
products described in these instructions comply with the
provisions of Directives and har- monized standards listed
below:
- RED 2014/53/EU:
Article 3.1a (Safety): EN60335-1/EN60335-2-30/EN60335-
EN62333
Article 3.1b (EMC): ETSI EN301489-1/ ETSI EN301489-3
Article 3.2 (RF): ETSI EN 300440
- ERP 2009/125/EC
- Regulation 2015/1188/EU
- ROHS 2011/65/EU : EN50581
and are manufactured using processes which are certified ISO 9001
V2015.
The symbol affixed on the product indicates that you must dispose
of it at the end of its useful life at a special recycling point, in accordance
with European Directive WEEE 2012/19/EU. If you are replacing it, you can
also return it to the retailer from which you buy the replacement equip-
ment. Thus, it is not ordi- nary household waste. Recycling products en-
ables us to pro- tect the environment and to use less natural resources.
M16MI325 A03_06/18
2-43/
20