LG G5300i Guide De L'utilisateur page 156

- Bearer
You can set the bearer data service.
• Data
• GPRS
- Data settings
Appeares only if you select Data settings as a Bearer\service.
IP address : Enter the IP address of the WAP gateway you
Dial number : Enter the telephone number to dial to access
Call type : Select the type of data call: Analogue or Digital
Call speed : The speed of your data connection;9600 or
User ID : The users identity for your dial-up server (and
Password : The password required by your dial-up server
- GPRS settings
The service settings are only available when GPRS is chosen as
a bearer service.
IP address : Input the IP address of the WAP gateway you
APN : Input the APN of the GPRS.
User ID : The users identify for your APN server.
Password : The password required by your APN server.
- Linger time
You need to enter timeout period.After entering that, the WAP
navigation service will be unavailable if any data is not input or
transfered.
want.
your WAP gateway.
(ISDN).
14400.
NOT the WAP gateway).
(and NOT the WAP gateway) to identify you.
access.
71