WR RolloTron Standard Série Mode D'emploi Et D'installation page 97

i
15. Removing the roller shutter belt winder (e. g. in the event of a move)
9.
Check the position of the fastening hook and move
the hook into an easily accessible position if necessary.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running. Always remove the mains plug or
switch off the mains power before touching the reel
compartment.
10.
Subsequently turn the power supply off permanently
and release the mains connection to the roller shutter
belt winder.
There is a risk of fatal electric shocks.
Check that the fixed cable is dead before disconnecting
the roller shutter belt winder.
11.
Release the belt from the fastening hook and pull it
out completely from the front of the roller shutter belt
winder.
EN
97