WR RolloTron Standard Série Mode D'emploi Et D'installation page 79

i
4. General safety instructions
◆ Children must not play with the device.
◆ Cleaning and user maintenance may not be carried out
by children without supervision.
◆ Watch the moving roller shutters whilst carrying out
the settings and during normal operation and keep
other people away from the area to avoid injury in the
event the shutters suddenly slip.
◆ Undertake all cleaning work on the roller shutters with
the equipment disconnected from the mains power.
When using a cable with mains power plug, the power
outlet and mains plug must be easily accessible at all
times.
Exceeding the maximum permissible running time (KB)
can overload and damage the roller shutter belt winder.
◆ The maximum permissible running time for a cycle
may not be exceeded when the equipment is in
operation. For this reason, the roller shutter belt
winder has an automatic running time limit (KB) of
four minutes.
◆ If the running time limit is triggered, then the roller
shutter belt winder must be left for at least 30 minutes
to cool down. Full operational availability is reestab-
lished after approx. one hour.
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must amount to at least 40 mm on
the lower edge in the rolled-out position with a force
of 150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
EN
79