Philips Inspiration Elite Mode D'emploi page 4

• Never operate this product if it has a damaged cord or plug, if it is not working properly,
if it is has been dropped or damaged, or dropped into water. Return the product to a
service center for examination and repair.
• Keep the cord away from heated surfaces.
• Never block the air opening of this product or place it on a soft surface, such as a bed
or couch, where the air openings may be blocked. Keep the air openings free of lint, hair,
and the like.
• Never use while sleeping or drowsy.
• Never drop or insert any object into any openings.
• Do not use outdoors or operate where aerosol (spray) products are being used
or where oxygen is being administered in a closed area such as an oxygen tent.
• Do not use compressor and nebulizer separately.
Save these instructions
How to use your Inspiration Elite
1. Check the medication nebulizer cup for damage. (The nebulizer cup enclosed with your
Inspiration Elite is disposable and should be replaced regularly. Ask your healthcare provider
for replacement guidelines and supplies.)
2. Place your Inspiration Elite unit on a firm, flat surface near an electrical outlet and in an area
where you can be seated comfortably during your treatment.
3. Plug the power cord into the electrical outlet.
4. Do not operate the unit without the filter or with a clogged (dirty) filter. Operating the
unit with a dirty filter can impair proper operation and cause damage that is not covered
by the warranty.
5. Wash your hands before preparing your medication.
6. Assemble your nebulizer cup and add your prescribed medicine following your prescription
and the separate nebulizer instructions.
7. Connect one end of the tubing to the bottom of the cup and the other end of the tubing
to the air outlet on the unit.
8.Turn the power switch on (
9. When your treatment is complete, turn the power switch off (
10. Clean the medication nebulizer cup according to its instructions.
l
) to begin your treatment.
O ) and unplug the unit.