Overview - EuroLite PAR-16 Spot Mode D'emploi

Pour lampe mr-16
Masquer les pouces Voir aussi pour PAR-16 Spot:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
The maximum ambient temperature T
Operate the spot only after having become familiarized with its functions. Do not permit operation by persons
not qualified for operating the spot. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the spot are forbidden due to safety reasons!
If this spot will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

OVERVIEW

= 45° C must never be exceeded.
a
13/31
(1) Colour filter frame
(2) Tube
(3) Mounting-bracket
(4) Hole for safety rope
(5) Extension spring
(6) Housing cover
(7) Mounting bracket screws
(8) Clip-to-hold clamps
00036889.DOC, Version 2.0

Publicité

Table des Matières
loading

Table des Matières