Publicité
Les langues disponibles
Les langues disponibles
12
SETTING ADJUSTMENT
1. Clock Setting
Press and hold
Use button ▲ to adjust hour and ▼ to adjust minute. To submit clock setting, press the
idle over 10 seconds the setting will be automatically submitted.
2. Power Save Mode Setup
MULTICLIN is featured a power saving mode to reduce electrical power consumption when not in use.
Once the setting is completed the power save function would turn the product on and off each day
according to your time settings.
Setting Powersave Start and End Time:
1) Press & hold
2) Powersave Start Setting: Press ▲ to adjust hour. Press ▼ to adjust minute. Press & hold
to finish the Start Time setting.
3) Powersave End Setting: "END" on LCD will blink. Press ▲ to adjust hour. Press ▼ to adjust minute.
Press & hold
IMPORTANT
The LCD screen will show
will be orange.
IMPORTANT
The LCD screen will show
will be green.
3. Enable and Disable Powersave:
Press the
Powersave mode the product will restore to regular operation and re-enter Powersave mode on the next
setting start time.
4. Remote Control Beeping/Silent Mode
Press and hold
mode.
IMPORTANT
There should be LED backlights on the remote control when you press any button and light out after 5
seconds. If the remote commander is in low power the backlight will be disable.
This icon
on the screen, shows low battery level. Please, replace the batteries.
button for over 3 seconds until the numbers on the screen flash.
for 3 seconds. "START" on LCD will blink.
button to finish the End Time setting.
when entering Powersave mode and the Powersave LED on the seat
when not entering Powersave mode and the Powersave LED on the seat
button alternatively to change the state of Powersave. Sitting on the seat when in
button for over 3 seconds to enable beeping sound, and repeat to return silent
OPERATION
Remote Control
button or
button
Publicité
Chapitres
