resto italia TECNO A KUBE 1 Mode D'emploi page 44

Correct procedure for the replacement of the thermostat (Fig. 6.7.2.):
• remove the control board panel (2) with the aid of the screwdriver (1);
• remove the control knob (5);
• unscrew the fixing screws of the thermostat (4);
• remove the electric connections;
• remove the thermostat (4);
• reassemble everything in the reverse order of removal.
Correct procedure for the replacement of the switch (Fig. 6.7.2.):
• remove the electric connections
• with a flat screwdriver, lever the tongues of the switch fixings (6);
• remove the switch (6);
• reassemble everything in the reverse order of removal.
1
4
5
ELECTRIC OVEN
3
2
6
Fig. 6.7.2. - Replacement of the thermostat and switch
KUBE 1
6
KUBE2
KUBE 2 PLUS
44
0.0