Introduction; Purpose Of The Manual; How To Read The Manual; Maintenance Of The Manual - resto italia TECNO A KUBE 1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1

1.1. PURPOSE OF THE MANUAL

The present user manual is an integral part of the machine and it has the aim to provide all the information necessary for:
• The correct awareness of the operators about the safety problems;
• The handling of the packed and unpacked machine in safety conditions;
• The correct machine installation;
• The in-depth knowledge of its operation and limits;
• Its correct use in safety conditions;
• Carrying out the maintenance operations in a correct and safe way;
• Disassembling the machine in safety conditions complying with the rules in force about health of workers and environment.
The persons responsible for the concern departments, in which this machine will be installed, are obliged to read the
content of this document carefully and to make the responsible operators and maintenance technicians read it, for
what concerns their parts, according to the rules in force in their own country. The time spent for the purpose will be
largely compensated by the correct operation of the machine and by its use in conditions of safety.
The document presupposes that applicable standards of work safety and health comply with the environments where the machine
is intended to be used.
The instructions, drawings and documentation in this manual are of a reserved technical nature, strict manufacturer's property and
may not be reproduced in any way, either in whole or in part.
In case the present document suffers modifications by the constructor, the client will be responsible that only the updated versions
of the manual are truly present in the use points.
1.2. HOW TO READ THE MANUALL
The manual has been subdivided into chapters; each one is addressed to a specific professional figure (installer, operator and main-
tenance technician) for which the necessary competences to operate on the machine in safety conditions have been defined.
The user manual is made up of a cover, index and a series of chapters. On the start page, you will find the machine and model iden-
tification data, the review of the user manual and a photo/drawing of the described machine type, to help the reader in the identifi-
cation of the machine and relative manual.
Starting from the first page, the index one, there is the review table of the user manual and its parts, correlating the level of review
of the whole manual with the one of index and chapters.
Page example:
Language
Concern Logo

1.3. MAINTENANCE OF THE MANUAL

The user manual must be kept in a safe place and must accompany the machine during all its life till its disposal.
The manual must be handled carefully, with clean hands and must not be placed on dirty surfaces. No parts must be taken away, torn
or arbitrary modified. The manual must be kept in a place protected against humidity and heat and next to the machine to which it
refers. The manufacturer, upon request of the user, can supply further copies of the machine user manual.
ELECTRIC OVEN

INTRODUCTION

Machine Name
KUBE 1
1
KUBE2
KUBE 2 PLUS
Model
N° Chapter
Rev.
KUBE 1
KUBE 2
26
0.0
N° Page

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tecno a kube2Tecno a kube 2 plus

Table des Matières