Bosch GBH 5-40 DCE Professional Notice Originale page 20

OBJ_BUCH-491-005.book Page 20 Friday, July 9, 2010 3:27 PM
20 | English
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
A damaged dust protection cap should be
changed immediately. We recommend hav-
ing this carried out by an after-sales serv-
ice.
Service Indicator 8
When the carbon brushes are worn out, the ma-
chine switches itself off. This is indicated ap-
prox. 8 hours beforehand by the lighting or
blinking of the service indicator 8. The machine
must then be sent to an after-sales service
agent. Addresses are listed in the Section "Af-
ter-sales Service and Customer Assistance".
Stand-by Indicator 9
When the mains plug is plugged in and mains
voltage is given, the stand-by indicator 9 must
be lit. When the machine cannot be switched on
despite lit stand-by indicator 9, it must be sent
to an after-sales service agent; for addresses,
see section "After-sales Service and Customer
Assistance", page 20.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
1 609 929 W79 | (9/7/10)
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Bosch Power Tools