Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY METHOD
Please assemble correctly according to following sequence.
Please keep the package properly for future storage.
1. Assembly of the stand
• Shove at first the decorative
ring and then the decorative
base cap over the base stand
• Connect the little plug (coming
out of the base stand) with the
socket (coming out of the base)
• Insert the fan into the base
• Use four pieces of cushions
fixing base and base stand.
• Unscrew the turn screw on the
base stand a little (not in
total!)
and
adjustable stand as far as you
want. Fasten it by tightening
the turnscew again.
2. assembly of the rear guard:
• Draw out the blade cap
clockwise and take out the
guard lock anti-clockwise,
and
then
rearguard by positioning it
over the three pins on the
frontmotor cover. Attention:
the handgrip up!
• Lock and fix it clockwise
with the guard lock.
pull
out
install
the
13
the
Publicité
