Ejection Of Beams - SORHEA MAXIRIS 3000 Notice D'installation

SORHEA
Note: To test the distance of each zone, turn switch 2 to the ON position on RX column and/or
TX.
In passing through the beams, the buzzer rings function of the zone crossed:
1 beep = Zone 1
2 beep = Zone 2
3 beep = Zone 3
4 beep = Undetermined zone (*)
(*) Undetermined zone: this alarm is generated when all the beams of the column are cut at the same
time.
8.4

Ejection of beams

Click on "Beams Configuration":
Example with deactivation of beam 2:
Before deactivation:
operation in dual-detection
- 73 -
MAXIRIS 3000 / 3100
Switch 2
to lift
"Beams Configuration"
tab
Choose the
beams to
deactivate
X X
After deactivation of beam 2:
operation in dual-detection