Using The Product; Commissioning - TESTO 623 Mode D'emploi

6 Using the product

6 Using the product
Pos : 26 /TD/Produkt verw enden/testo623/testo 623 Inbetriebnahme @ 4\m od_1254827956852_79.doc @ 51413 @ 2
6.1.

Commissioning

The date and time must be set on commissioning.
1. Select the required function with [Set].
> The adjustable parameter flashes.
2.
settings, see following table).
- Instrument returns to the display.
Display
DD.MM.YYYY
or
MM.DD.YYYY
Year flashes
Month flashes
Day flashes
24H
flash
Hour flashes
Minute flashes
Second flashes
°C
flashes
Update date & time flashes acti vate Yes / deac tivate No activ ate Yes / deactiv ate No
28
If no button is pressed > 30 sec, the testo 623 changes to
Measuring Mode. To perform additional settings, press and
[Set]
hold for 2 sec.
◄
Set values with [
To scroll rapidly forward and back in the respective menu,
press and hold
[Esc]
Press to cancel settings without saving them.
[Set]
Hold down for 2 s to save previously set values and
leave the menu.
flashes
flashes
or 12H (AM/PM)
If the power supply is interrupted the settings are being
saved for at least 3 min.
►
] or [ ] and confirm entry with
◄ ►
[ or ].
Function
Set date format
Set year
Set month
Set day
Set time format
Set hour value
Set minute value 00 - 59
Set second value 00 - 59
Set unit for
temperature
[Set]
Setting option
DD.MM.YYYY = day,
month, year
MM.DD.YYYY =
month, day, year
2009 - 2099
01 - 12
01 - 31
24h/12h
00 - 23 or 01 - 12
°C/°F
(for