Inverted Installation - Axis Q8685-LE Guide D'utilisation

AXIS Q8685-LE PTZ Network Camera
1
Connector from the illuminator (x2)
2
Connector from the positioning unit (x2)
6. Connect the cables. See Connectors on page 49.
7. Attach the illuminator bracket to the positioning unit using the four screws (T20, torque
3.0 Nm).
Note
For more information on operating the illuminators, see the illuminator LED manual
(check model on product label) and the User Manual of your compatible Axis product at
www.axis.com

Inverted installation

Note
Follow this installation to set the camera housing in an inverted configuration, if tilting
directly upwards is preferred.
36