How To Install The Product; Main Installation Tasks - Axis Q8685-LE Guide D'utilisation

How to install the product

Main installation tasks

1. Mount the base unit on page 22
2. Route the cables on page 23
3. Install the network link on page 29
4. Connect the cables on page 30
5. Install the illuminator kit. Follow one of two installations:
- Install the illuminator kit (default installation) on page 31
- Inverted installation on page 36, followed by Install the illuminator kit (inverted
installation) on page 39
6. How to access the product on page 44
7. Set the inverted configuration on page 45
8. Enable the illuminator kit on page 45
9. Install an SD card (optional) on page 46
DANGER
Risk of electric shock. All cables shall be de-energized before installing the product.
CAUTION
The electrical connections and conduit installations shall be made by a certified electrician
and in compliance with local regulations.
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in
operation. Disconnect from power supply before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect
from power supply and allow the surfaces to cool before performing maintenance on
the product.
AXIS Q8685-LE PTZ Network Camera
21
EN