Install The Hardware - Axis M11 Serie Guide D'installation

Page 10

Install the Hardware

AXIS M11 Series is designed for indoor and outdoor use. To use the camera outdoors, install
in an approved outdoor housing. Please see www.axis.com for more information on outdoor
housings.
1. Attach the stand to the camera by screwing it on. For wall mounting, attach the stand to wall
first, using 3 appropriate screws.
2. Attach the cable to the network connector (supports PoE class 1) in the camera.
3. Check that the indicator LEDs indicate the correct conditions. See the table above.
Access the Product
Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
AXIS M11 Series Installation Guide