Connect The Cables - Axis Q8685-LE Guide D'utilisation

AXIS Q8685-LE PTZ Network Camera

Connect the cables

1. Loosen the four lid screws (T20) and remove the lid.
1
Input power connector
2
I/O connector
3
RJ45 connector
4
SFP slot for SFP module (SFP module not included)
2. Connect the network (optical fibre and/or RJ45), I/O and power cables. For more
information on different network connectivity options, see Install the network link on
page 29.
3. Return the lid to its position and tighten the four lid screws (torque 3.0 Nm).
30