Axis 231D/232D Network Dome Camera; Installation Guide; Installation Steps; Package Contents - Axis 231D Guide D'installation

AXIS 231D/232D Installation Guide

AXIS 231D/232D Network Dome Camera

This installation guide provides instructions for installing the AXIS 231D/232D Network Dome
Camera on your network. For all other aspects of using the product, please see the AXIS 231D/
232D User's Manual, available from www.axis.com

Installation steps

Follow these steps to install the AXIS 231D/232D on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the camera. See page 6 and page 7.
3. Set an IP address. See page 7 for information on the available methods.
4. Set the password. See page 12.

Package contents

Item
Network Dome Camera
Connection Module
Connection Module Cable
Indoor Power Supply with
power cable
Mounting Kits
This document
Warranty Document
Optional accessories are available for mounting on ceiling, wall, corner and pole, for both
indoor and outdoor use. For more information, please visit the Axis Web site:
http://www.axis.com

Before you begin

If the AXIS 231D/232D is to be mounted in a position where it is difficult to access, it is
recommended that you set the IP address and get the camera up and running before
completing the hardware installation.

Installation Guide

Title/Variants
AXIS 231D/232D
Europe
UK
Australia
USA/Japan
Korea
Hard Ceiling Mount for Indoor Use
Inset Ceiling Mount for Indoor Use
AXIS 231D/232D Installation Guide
The power supply is country
specific, please check that the
type of power supply you are
using is correct.
Page 5