Setting The Ip Address - Axis 231D Guide D'installation

Page 8

Setting the IP address

The AXIS 231D/232D is designed for use on an Ethernet network and must be assigned an IP
address to make it accessible.
AXIS IP Utility
AXIS IP Utility is the recommended method for setting an IP address in Windows. This free application can be
used on networks with or without a DHCP server. See page 9 for more information.
All installation methods
This table shows all of the available methods for setting or discovering the IP address. Select a
method from the left-hand column and check the requirements for it
Requirements
Installation
methods
AXIS IP Utility
(recommended method)
See page 9
UPnP™
See page 10
ARP/Ping
See page 10
AXIS Dynamic DNS Service
See page 11
View DHCP server
admin pages for IP address
(See note below)
Notes:
UPnP™ and DHCP are both enabled by default in the AXIS 231D/232D.
The AXIS 231D/232D has the default IP address 192.168.0.90
To view the admin pages for the DHCP server, please see the server's own documentation. You may need to con-
tact your network administrator.
If setting the IP address fails, check that there is no firewall blocking the operation.
DHCP Server in Install on same
network network segment
Optional Required
Optional Required
Required
Recommended
Required
AXIS 231D/232D Installation Guide
to the right.
Internet connection Operating
with no HTTP proxy system
Windows
Windows
(ME or XP)
All
Required All
All