Correct Use; Unpacking; Commissioning - IKA KS 4000 i control Mode D'emploi

Masquer les pouces Voir aussi pour KS 4000 i control:
Table des Matières

Publicité

Correct use

• Use
- For mixing and/or heating liquids
• Range of use
- Laboratories
- Pharmacies
This device is suitable for use in all areas except:
- Residential areas
- Areas that are connected directly to a low-voltage supply net-
work that also supplies residential areas.
The safety of the user cannot be guaranteed if the appliance is
operated with accessories that are not supplied or recommen-
ded by the manufacturer or if the appliance is operated impro-
perly contrary to the manufacturer's specifications or if the appli-
ance or the printed circuit board are modified by third parties.

Unpacking

• Unpacking
- Please unpack the device carefully
- In the case of any damage a detailed report must be set imme-
diately (post, rail or forwarder)
• Contents of package
KS 4000 i control
- Shaking device
- Mains cable
- Operating instructions
- 4 clamping screws short
- 2 clamping screws long
- Temperature sensor PT 1000.60 - Temperature sensor PT 1000.60
KS 4000 i 1208
- Schools
KS 4000 ic control
- Shaking device (temperierbar)
- Mains cable
- Operating instructions
- 4 clamping screws short
- 2 clamping screws long
- 2 hose connecting pieces
- unlocking handle

Commissioning

Make sure before start-up of the equipment that the drain hose
leads into a drain!
Check whether the voltage specified on the type plate matches
the mains voltage available. The power socket used must be ear-
thed (protective earth conductor contact). If these conditions are
met, the device is ready to operate after plugging in the mains
plug. If these procedures are not followed, safe operation cannot
be guaranteed and/or the equipment may be damaged.
Observe the ambient conditions (temperature, humidity, etc.)
listed under Technical Data.
Switching on
The appliance is switched on using
the switch on the side of the applian-
ce. Once it has been switched on, all
of the LEDs light up briefly during the
self test.
8888
888
888
1
Display fields
A
01
2
Operating mode
Software
version
SAFE
275
55.5
3
Safety
max. ad-
max. ad-
limit
adjustable ajustable
values
speed
temperature
Note the load guideline values for the attachments prior to
switching appliance on (see "Attachments").
Main switch I / 0
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ks 4000 ic control

Table des Matières