Télécharger Imprimer la page

NEC MultiSync LCD1850X Manuel Utilisateur page 25

Masquer les pouces Voir aussi pour MultiSync LCD1850X:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 102
RESOLUTION NOTIFIER
This optimal resolution is 1280 x 1024. If ON is
selected, a message will appear on the screen after
30 seconds, notifying you that the resolution is not at
1280 x 1024.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSM
control settings back to the factory settings. The RESET
button will need to be held down for several seconds to
take effect. Individual settings can be reset by
highlighting the control to be reset and pressing the
RESET button.
Information
DISPLAY MODE
Provides information about the current resolution
display and technical data including the preset timing
being used and the horizontal and vertical frequencies.
Increases or decreases the current resolution. (Analog
input only)
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there
is no signal present. After power is turned on or when
there is a change of input signal or video is inactive, the
No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a
warning of use with optimized resolution. After power is
turned on or when there is a change of input signal or
the video signal doesn't have proper resolution, the
Resolution Notifier window will open. This function can
be disabled in the TOOL menu.
01b_English
English-14
14
2/4/01, 3:39 pm

Publicité

loading

Ce manuel est également adapté pour:

Lh-18s02-1Lh-18s02-bk1