What You Can Learn About Your Wireless Network; What Is The Health Of My Network - Fluke Networks AirCheck Mode D'emploi

AirCheck Getting Started Guide
What You Can Learn About Your
Wireless Network?

What is the Health of My Network?

 How is my Wi-Fi Air Quality?
Are my channels overloaded with access points
and Wi-Fi traffic?
Are any of my channels too noisy?
Select AutoTest - After the AutoTest has run, select
Air Quality to view the results of 802.11 Channel
Utilization, Non-802.11 Channel Utilization, and Co-
Channel Interference health assessment.
The 802.11 Channel Utilization results include the
top three busiest channels having the most Wi-Fi
traffic. The channel utilization value along with the
rating of
displayed. The test grade is based on a comparison
of the actual value to user settable thresholds.
These thresholds are configured in the Tools >
Thresholds / AutoTest Settings.
The Non-802.11 Channel Utilization results include
the top three channels with the most non- 802.11
interference and noise. The channel utilization
value along with the rating of
Warning, or
The Co-Channel Interference results include the top
three channels with the most APs with a minimum
signal strength and signal quality. The AP count
along with the rating at or above
Warning, or
6
Pass, Warning, or
Fail, is displayed.
Fail, is displayed.
Fail, is
Pass,
Pass,