Minimum Configuration For The Best Performance - Fluke Networks AirCheck Mode D'emploi

Minimum Configuration for the Best Performance

Minimum Configuration for the Best
Performance
To change the language and country settings
Press Tools.
1
To change the language for the screens, select Set
2
language. Highlight a language, then press
Save.
To change the country, select Set country, then
3
select the country where you will use the tester.
To get the best performance from your tester, use
AirCheck Manager PC software to configure a profile
™
and upload it to the tester. A profile can also be
configured on the AirCheck tester. A profile contains
data that lets the tester do these tasks:

Connect to networks that require security
credentials.

Show the correct authorization status for each
access point. This lets you quickly see which access
points are authorized parts of the network.

Ping key network devices.

5