Connecting Two Or More Cameras - Multi-Camera System; Connection - Sony DXC-LS1P Instructions D'utilisation

Connecting Two or More Cameras — Multi-Camera System

Connection

Notes on multi-camera systems
Take the following step to prevent flicker when switching
between two or more cameras connected to a video switcher.
Sync signal generator or
camera
Sync (VBS) output
VBS OUT
Video switcher, etc.
VBS IN
Video monitor,
VCR, etc.
38
Camera control unit
GEN LOCK
75Ω coaxial cable
VBS IN
Camera control unit
VBS OUT
GEN LOCK
75Ω coaxial cable
CCDC-5/10/25/50A/100A power supply cable (4-pin) or
CCMC-12P02/05/10/25 power supply cable (12-pin)
• Adjust the subcarrier and horizontal synchronization
phases for all cameras.
For more details, see "Adjusting the Picture Tone in a Multi-
Camera System" on the next page.
DC IN/VBS
VIDEO OUT
CAMERA (4-pin or
12-pin)
CCDC-5/10/25/50A/100A power supply
cable (4-pin) or CCMC-12P02/05/10/25
power supply cable (12-pin)
DC IN/VBS
VIDEO OUT
CAMERA (4-pin
or 12-pin)
CMA-D2CE camera adaptor
Set the MODE selector
to the "1" position.
AC IN
Power cord
CMA-D2CE camera adaptor
Set the MODE selector
to the "1" position.
AC IN
Power cord