Sony DXC-LS1P Instructions D'utilisation page 26

Adjusting and Setting with Menus
AREA
You can select the exposure area depending on the shooting
condition.
• The area can be selected from "BL" (adjusting the
backlighting), "FUL" (whole the screen), "C1" (for a spot),
"C2" (for a bigger spot), "S1" (for a slit) and "S2" (for a
wider slit). "Adjusting the backlightling" means that not
only backlighting but also ordinary lighting is adjusted
properly.
FUL
S1
Exposure areas
26
C1
C2
S2
• When you select "FUL", "C1", "C2", "S1" or "S2", you
can also select the amount of the lighting "PEAK" or
"AVE" (average).
PEAK: The exposure is set depending on the brightest
point in the exposure area.
AVE (average): The exposure is set depending on the
average brightness in the exposure area.
When you press DISP to display only one item on the
screen, the area indicator selected is displayed.
FLICKER
Gives you flickerless images even under fluorescent light.
Selection Function
AUTO Erases the flicker. Functions when the shutter speed is
between 1/50 and 1/200.
Notes
• If "PEAK" is selected as the amount of the lighting,
this function does not work.
• Under many fluorescent lights, this function may not
be effective.
OFF Normally select this setting.
SHUTTER
Sets the electronic shutter when "OFF" is selected in "AE
MODE".
The electronic shutter allows for blur-free images of fast-
moving subjects and produces good still images of subjects
shot in poor lighting conditions.