Preparation Before Shooting; Connecting Through Digital Output - JVC 3-CCD KY-F550 Mode D'emploi

2. Preparation Before Shooting

Connecting Through Digital Output

Computer can be used to control this unit remotely, record captured images on digital device or display them
on the computer or monitor. (Please pre-install the exclusive software for this unit.)
BR-DV3000
BR-DV6000
DV VTR
Exclusive Software
Computer
1.
Connect the [DV] terminal of this unit to the computer's DV [IEEE1394] terminal.
2.
Set the Switch 1 and Switch 4 located at the side of this unit to [ON] (upper side).
3.
Switch on the power of this unit.
4.
Set the "DV SYSTEM" under "SYSTEM" screen to "JVC".
5.
Power on the computer and launch the software.
With the exclusive software provided, it is possible to select the various camera settings and operate the
camera for shooting. For details, please consult your JVC-authorized dealer.
Please refer to the software's HELP menu for details on how it could be used.
Caution
● Perform this when the devices are off.
● When the software has been launched, do not switch on/off the power of the AC adapter or insert and
remove the IEEE 1394 cable.
● Disable the automatic standby or hibernation function of your computer before using it.
● This unit's power can be supplied from the IEEE 1394 cable. However, use the power supply voltage
between 10.5 V - 15 V if power lens is to be used. Ensure that the supply capacity of the supply source is
adequate in meeting the total power consumptions of both this unit and the power lens used.
E-14
BNC CABLE
Monitor
[VIDEO OUT]
Clamp filter
[DV]
(accessories)
'Connecting the
IEEE 1394 Cable'
(Page 48)
IEEE 1394
Terminal
'Mounting the
Lens' (Page 17)
'Connecting the
AA-P700
Power Supply'
AC ADAPTER AA-P700
(Page 18)
POWER
ON
OFF
AC Adapter
[DC IN]
Notes
[LENS]
● 2 or more of this unit cannot be con-
● Ensure to attach the supplied clamp
AC IN
nected to 1 computer.
filter to the cable connected to the Digi-
tal Output [DV] terminal in order to re-
duce unwanted electromagnetic emis-
sions.
OFF
Switch 1
1 2 3 4
ON
Switch 4