Battery Replacement; Important; Bluetooth Data Transmission - VISIOMED Bewell Connect MyThermo Pocket Mode D'emploi

Note: When changing batteries, the stored data will be erased.

7. BATTERY REPLACEMENT

Remove the battery cover and use a tool to take out the drained battery
(below picture C), then place a new battery, taking care to respect the polarity.
The LCD screen will display all the symbols on the screen.
Use only new batteries (1 x CR2032), never use rechargeable batteries.
Replace the cover after inserting the battery (below picture D).
CR2032
C

IMPORTANT:

- Respect the polarity of the batteries. A polarity error can cause
damage and void the warranty of your unit.
- Do not use battery other than the battery mentioned, do not
recharge non-rechargeable battery, do not incinerate them.
- Remove the battery when not using the thermometer over a
prolonged period. This may damage the product.

8. BLUETOOTH DATA TRANSMISSION

- Press measurement button to turn on MyThermo Pocket.
- Open the BewellConnect APP in your mobile device, choose body
temperature mode. MyThermo Pocket's Bluetooth will connect with
APP automatically. Bluetooth symbol will be displayed on the LCD
screen of MyThermo Pocket.
- The measure will automatically be uplaoded on the app.
If you have trouble with the Bluetooth connection:
- Check the list of smartphones and tablets that are compatible with our
apps.
- Make sure that your Bluetooth is turned on, fully charged or connected
to power.
28
D
BewellConnect - BW-MTX1 - User Manual - 2018-06_V1
CR2032