Diagnostic Of The Measurement; Data Memory - VISIOMED Bewell Connect MyThermo Pocket Mode D'emploi

4. The result is automatically stored. When taking consecutive
temperature measurements, it is possible that the results will not be
identical. Wait at least 1 minute between each measurement.
5. If the temperature exceeds the alarm temperature value, the buzzer
will beep four times.
6. In case of difficulty for inserting the probe, you can gently pull the ears
backwards, insert gently along the ear canal, do not insert it strongly.

6.3.3. DIAGNOSTIC OF THE MEASUREMENT

T (°C)
30 ≤ T°< 35
35 ≤ T° ≤ 36,2
36,3 ≤ T° ≤ 37,3
37,4 ≤ T° ≤ 37,9
38 ≤ T° ≤ 43
1. REULER, James B. Hypothermia: pathophysiology, clinical settings, and management. Annals of internal
medicine, 1978, vol. 89, no 4, p. 519-527.
2. Koushik Maharatna,Silvio Bonfiglio, Systems Design for Remote Healthcare, Springer Science & Business
Media, 13 nov. 2013 - 332 pages.
3. Wunderlich, C.A. and J.C. Reeve, The course of the temperature in diseases: a guide to clinical
thermometry. American Journal of Medical Science, 1869. 57: p. 423-47 . Various sources have slightly
different temperatures for fever.
When the temperature is <30 ° C, Lo is displayed on the screen.
When the temperature is> 43 ° C, Hi is displayed on the screen.

6.4. DATA MEMORY

Open the battery compartment to access the setting buttons. Press the
MEM button, the LCD screen reads and displays the last temperature
reading.
1. " --- " Will be displayed if no data is stored
2. Press the MEM button to scroll through the previous data, then
press the °C/°F to scroll through the next data. 10 measurements are
memorized.
BewellConnect - BW-MTX1 - User Manual - 2018-06_V1
Beep
Di-Di-Di-Di
Di
Di
Di
Di-Di-Di-Di
Application
display
Red
Orange
Green
Orange
Red
Diagnostic
Hypothermia
1
Temp. to watch
Normal temp.
2
Temp. to watch
Fever
3
27