Functions; Mythermo Bw-Cx10; Battery Loading; Internal Battery - VISIOMED BewellConnect MyThermo BW-CX10 Mode D'emploi

- Be aware of physiological variations in temperature which must be taken into consideration
when evaluating the results: temperature increases by 0.5C° between 6am and 3pm. Women
have a temperature that is higher, on average, by around 0.2C°. Their temperature also varies in
accordance with their ovarian cycle. It rises by 0.5C° in the second half of the cycle and at the
early stages of pregnancy.
- When sitting, temperature is lower by about 0.3° to 0.4°C than when standing.
How to measure a temperature
SEE SCHEMA A PAGE 2.
Aim at the FOREHEAD, over the right temporal region, from a distance of about 3-5cm,
press the thermometer's measurement button and the temperature is instantly displayed.
The reliability of the measurement cannot be guaranteed if the temperature is measured
over another part of the body (e.g. arm, torso...).
Constraints
Please observe the following before any temperature measurement to ensure a stable and
reliable result:
- Push back hair from the forehead.
- Wipe away any perspiration from the forehead.
- Avoid any drafts (e.g. from nasal specs, air conditioning...).
- The thermometer cannot be used as long as the display screen is not switched off.
- Each time there is a significant change in the ambient temperature due to a change in environ-
ment, to allow the MyThermo BW-CX10 to acclimatise to this ambient temperature for at least
15 minutes before using it.

5. FUNCTIONS

1. Specially designed to take the body temperature of a person regardless of the room tempe-
rature.
2. Quick and reliable results as it use the HEIMMANN infrared detection system.
3. Sound alarm when temperature is exceeded
4. Temperature diagnostic : colour indicator for indicating and interpreting the temperature
obtained
5. Functions
- Measurement range from 30 to 43°C (86 to 109.4°F).
- Hi displays when the result is above 43°C (109.4°F).
- Lo displays when the results is below 30°C (86°F).
6. LCD back-lighted digital screen
24 BewellConnect - BW-CX10 - User Manual - 112014
BW-CX10_MANUAL_FR-UK_072015.indd 24-25
7. Bluetooth connection to follow temperature curve through Bewell Connect Mythermo Appli-
cation
8. Data displayed in Celsius or Fahrenheit
9. Automatic stop
10. Charging via USB cable
11. Small, practical, easy to use
Additional uses:
The MyThermo BW-CX10 can also be used to measure the temperature of a baby-bottle or bath,
or room temperature (by using the SURFACE TEMP or ROOM function). This function is in accor-
dance with the Directive 89/336/EEC Electroma-gnetic Compatibility.

6. MYTHERMO BW-CX10

SEE SCHEMA B PAGE 2.
1 Measurement button 2
Bluetooth transfer button
4 5 Infrared sensor
Temperature C°/F° switch button

7. BATTERY LOADING

Before using MyThermo for the first time, please load the battery via the USB cable.

INTERNAL BATTERY

Battery DC3.7V (lithium battery)
Battery can be loaded and used regularly
LOAD INDICATOR
When Mythermo is unloaded, the battery symbol is setting on the screen in order to indicate
the level of loading.
You can keep on using MyThermo, it will emit 5 Long "BIPs" in a row and will automatically switch
off, when the battery is totally unloaded.
When the battery is totally loaded, automatic switch-off of the electricity avoids overloading
and a longer battery life.
Please load again the battery every 6 Months if the device has not been used during a long
period of time.
BewellConnect - BW-CX10 - User Manual - 112014
3 LCD screen
6
Mode setting button
25
13/07/2015 17:11