Training Guide; Begin Your Pet's First Session - Petsafe PWF17-15853 Manuel D'utilisation

4. To program the Receiver Collar to either mode A or mode B, press and hold the (-)
button and then press the (+) button for approximately 5 seconds. Programming is
complete when you hear a series of three beeps from the Receiver Collar.
5. Once the Receiver Collar has been programmed, press the (+) button to turn the
Barrier Transmitter ON. Check to make sure the black bar(s) appear on the LCD
screen indicating the mode you have selected (5B) and reset the Barrier Transmitter
to the desired range.
5B
Mode A
The PetSafe Pawz Away
®
and negative reinforcement. Your pet will learn to avoid the Barrier Areas you have
set after receiving a Progressive Static Stimulation (negative reinforcement) and
your pet will learn that he is more comfortable when he avoids the Barrier Areas
(positive reinforcement).
In some cases, it may not be necessary to train your pet. You can let your pet wander
freely to determine the new boundaries. Monitor your pet during his first
session. Pets learn at different rates and it may take several times for your pet to
successfully understand and honor the Barrier Areas.

Begin Your Pet's First Session

1. Move your pet away from the Barrier Area.
2. Turn the Receiver Collar ON (l). Place the Receiver Collar around your pet's neck.
Be sure that the Receiver is directly under your pet's neck.
3. Allow your pet to wander freely to learn the new boundaries.
14
Mode B

TRAINING GUIDE

Mini Pet Barrier operates on the principle of positive
™
www.petsafe.net
Mode AB